 公司產品

CONCENTRICO CABLE 

Power cables for energy supply are used for industry and distribution boards, power stations, house connecting boxes and street lighting as well as control cable for the transmission of control impulses and test data. Overall, where increased electrical and also mechanical protection are required. Those cables are installed in open air, in underground, in water, indoors and in cable ducts. The concentric conductor (C) is allowed to use as PE-, PEN-conductor or as shield. due to the typical construction of concentric conductors it is possible to obtain many more cable joints, without cutting any conductor. In that way the operating reliability is guaranteed.

ABC CABLE 

Aerial bundled cable, ABC overhead cable ,serive drop are primaril used for overhead serive applications such as street lighting,outdoor lighting,and tempoary serive for construction.To be used at volatage of 600V phase-to-phase or less and at conductor tempertures not to exceed 75℃ for polythylene / PE insualted conductor or at 90℃ for crossliked polythtlene(XLPE) insulated conductors.

AAAC CONDUCTOR 

All Aluminum Alloy Conductors / aaac cables is used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum-alloy to achieve a high strength-to-weight ratio, AAAC also has better sag characteristics and a better strength to weight ratio than AAC.

AAAC Cables have lower weight per unit length and slightly lower resistance per unit length than ACSR.

All-Aluminum Alloy Conductors /aaac cables are made of aluminum-magnesium-silicon alloy of high electrical conductivity (min 53% IACS) containing magnesium (0.6-0.9%) & silicon (0.5-0.9%) to give it better mechanical properties after treatment. AAAC conductors are made out of aluminum alloy 6201.

AAC CONDUCTOR 

AAC conductor have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance ,low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

ACSR CONDUCTOR 

ACSR Conductor is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. These conductors are formed by several wires of aluminum and galvanized steel, stranded in concentric layers. The wire or wires which form the core are made of galvanized steel and the external layer or layers are of aluminum. Normally these conductors have a Galvanized steel core of 1, 7, 19 or 37 wires, surrounded by concentric layers of aluminum wires. The diameters of the steel and aluminum wires can be alike or different. By varying the relative proportions of aluminum and steel ratios, the ideal conductor can be produced for any particular application. In this way , if a high tensile strength conductor is required, the number of steel wires can be increased until the required strength is reached . When a conductor with high current carrying capacity and a comparatively low strength is required, this is attained with high aluminum content

 公司簡介

鄭州三和電纜有限公司成立于2008年 10月14日，是集科研.生產.貿易為一體的大型股份制企業，通過了多項國際認證。經營范圍：銷售電線電纜，機電產品，成套機械設備，電工器材，五金工具，儀器儀表，銅材，鋁材；從事貨物和技術的進出口業務（法律法規禁止的貨物和技術除外），經營方式是出口，公司堅持“以人為本.科技為先”的管理理念，“以質量求生存，以信譽求發展”的經營理念，取得了矚目的成績。鄭州三和電纜有限公司愿和有志之士攜手共謀發展之路。

 公司風采





 招聘職位 更多職位>>